上海百铭仪器有限公司
实验室仪器设备
|
上海百铭仪器有限公司 |
Test procedures for the TABER Abraser have been established by a number of organizations. The following is a partial listing. |
| AM | 63 | Resistance to Scuffing |
| ANSI | BSR INCITS 322 | Card Durability Test Methods |
| ANSI/NSF | 35-1991 | Laminated Plastics for Surfacing Food Surface Equipment |
| ANSI/NSF | 51-1997 | Food Equipment Materials |
| ANSI/SAE | Z26.1-1990 | American National Standard for Safety Glazing Materials for Glazing Motor Vehicles |
| AS | 2001.2.28 | Determination of Abrasion Resistance of Textile Fabrics |
| AS/NZS | 1580.403.2 | Paints and Related Materials – Methods of Test; Abrasion Resistance |
| ASTM | C217 | Test Method of Weather Resistance of Slate |
| ASTM | C241 | Standard Test Method for Abrasion Resistance of Stone |
| ASTM | C501 | Relative Resistance to Wear of Unglazed Ceramic Tile by Taber Abraser |
| ASTM | C1353 | Abrasion Resistance of Dimension Stone Subjected to Foot Traffic |
| ASTM | D1044 | Test for Resistance of Transparent Plastics to Surface Abrasion |
| ASTM | D3389 | Coated Fabrics – Abrasion Resistance (Rotary Platform) |
| ASTM | D3884 | Abrasion Resistance of Textile Fabrics (Rotary Platform) |
| ASTM | D4060 | Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM | D4158 | Abrasion Resistance of Textile Fabrics (Uniform Abrasion Method) |
| ASTM | F362 | Determining the Erasability of Inked Ribbons |
| ASTM | F510 | Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method |
| ASTM | F1478 | Abrasion Resistance of Images Produced from Copiers and Printers |
| ASTM | F1978 | Abrasion Resistance of Metallic Thermal Spray Coatings By Using the Taber Abraser |
| BS | 3900 | Paints and Varnishes; Determination of Resistance to Abrasion; Abrasive Paper Method |
| BS EN | 660 P2 | Resilient Floor Coverings – Determination of Wear Resistance; Part 2 Frick-Taber Test |
| BS EN ISO | 5470-1 | Rubber- or Plastics-Coated Fabrics – Determination of Abrasion Resistance; Part 1: Taber Abrader |
| Chrysler | MS-PP11-1 | Vacuum Metallizing for Plastic Parts – First Surface Interior |
| Chrysler | MS-PP11-2 | Vacuum Metallizing – High Wear Resistance for Plastic Parts – First Surface Interior |
| CNS | K6591 | Method of Test for Polyurethane Athletic Installation Material |
| Delphi | DX900117 | Abrasion Resistance of Organic Coatings (Taber Abraser Method) |
| DLA | 1.413194444 | Determination of Resistance to Surface Wear (Germany) |
| DIN | 52 347 | Testing of Glass and Plastics; Abrasion Test; Method Using Abrasion Wheels and Measurements of Scattered Light |
| DIN | 53 109 | Testing of Paper and Board; Determination of Abrasion by the Abrasion Wheel Method |
| DIN | 53 754 | Testing of Plastics; Determination of Resistance of Wear by Abrasive Wheels |
| DIN | 53 799 | Decorative Laminated Sheets on Basis of Aminoplastic Resins; Test Method |
| DIN | 68 861 T2 | Furniture Surfaces: Behavior at Abrasion |
| DIN EN | 660 P2 | Resilient Floor Coverings – Determination of Wear Resistance; Part 2 Frick-Taber Test |
| DIN EN ISO | 5470-1 | Rubber- or Plastics-Coated Fabrics – Determination of Abrasion Resistance; Part 1: Taber Abrader |
| EN | 438-2 | Decorative High Pressure Laminates (HPL); Sheets Based on Thermosetting Resins; Part 2: Determination of Properties |
| PR En | 13329: 1998 | Specifications, Requirements and Test Methods for Laminate Floor Coverings |
| PR En | 175.333.08 | Wood Flooring Test Method to Determine Elasticity and Resistance to Wear (European)- |
| Federal | CCC-T-191B | Federal Test Methods & Specifications; Textile Test Methods: |
| Method 5306.1 – Abrasion Resistance of Cloth | ||
| Method 5309.2 – Abrasion Resistance of Textile Webbing | ||
| Federal | L-P-406B | Federal Test Method & Specifications; Plastics, Organic General Specifications Test Methods: |
| Method 1091 – Abrasion Wear (loss in weight) | ||
| Federal | GG-P-455B | Federal Specification: Plates and Foils, Photographic |
| Federal | TT-P-141B | Federal Test Methods & Specifications; Methods of Inspection, Sampling and Testing Paint, Varnish, Lacquer and Related Materials |
| Method 6912 – Abrasion Resistance of Films of Organic Coating Materials | ||
| Federal | TT-C-542E | Coating, Polyurethane Oil Free Moisture Curing |
| Federal | TT-E-487E | Enamel, Floor and Deck |
| Federal | TT-P-85E | Paint, Traffic: Reflectorized for Airfield Runway Marking (drop-on type) |
| Federal | TT-P-87D | Paint, Traffic: Premixed, Reflectorized |
| Federal | TT-P-91D | Paint, Rubber Base, Styrene-Butadiene Type, Interior, for Concrete Floors |
| Federal | TT-P-95C | Paint, Rubber: For Swimming Pools |
| Ford | BN-108-02 | Resistance to Abrasion – Taber Abraser |
| Ford | BN-108-04 | Resistance to Scuffing |
| General Motors | GM BOCTM 54-30 | Abrasion Resistance of Organic Coatings (Taber Abraser Method) |
| General Motors | GM FBTM 54-30 |
Abrasion Resistance of Organic Coatings (Taber Abraser Method) |
| General Motors | GM9515P | Abrasion Resistance of Organic Coatings by the Taber Abraser |
| General Motors | GM9911P | Procedure to Determine Paint Adhesion |
| General Motors | GM BLTP.TI 298 |
Wear Taber Abraser Test |
| General Motors | GMW 3208 | Rotary Abrasion Test – Taber Type |
| ISO | 3537 | Road Vehicles; Safety Glazing Materials; Mechanical Tests |
| ISO | 4586-2: 1997 | Abrasion Resistance of Decorative Laminated Sheets |
| ISO | 5470-1 | Rubber or Plastics Coated Fabric-Determination of Abrasion Resistance |
| ISO | 7784-2: 1997 | Paints and Varnishes; Determination of Resistance to Abrasion; Abrasive Paper Method |
| ISO | 9352:95 | Plastics; Determination of Resistance to Wear by Abrasive Wheels |
| ISO | 10074-Annex B | Taber Abrasion Test Method |
| JIS | A 1453 | Method of Abrasion Test for Building Materials and Part of Building Construction |
| JIS | K 6902 | Testing Method Foil Laminated Thermosetting Decorative Sheets |
| JIS | K 7204 | Testing Method for Abrasion Resistance of Plastics by Abrasive Wheels |
| MIL | A-8625F | Anodic Coatings for Aluminum and Aluminum Alloys |
| MIL | C-13495B | Test for Carrying Case |
| MIL | I-43553B | Ink, Marking, Epoxy Base |
| MIL | M-13231C | Marking of Electronic Items |
| MIL | P-18493 | Packing, Preformed, Carbon and Carbon Stock Packing |
| MIL | T-28800D | Test Equipment for use with Electrical and Electronic Equipment |
| NAS | 1192 | Performance Specification for Hard Anodic Coatings on Aluminum Alloys |
| NEMA | LD3-3.13 | Wear Resistance of High-Pressure Decorative Laminate |
| NF | B 51-282 | Melamine Faced Chipboard: Determination of Resistance against Abrasion |
| NF | G 37-121 | Rubber of Plastic Coated Fabric – Determination of Wear Resistance by Rubbing with Two Abrasive Wheels (France) |
| NF | T 30-015 | Abrasion Resistance Tests of Paint and Lacquer (France) |
| NF | T 54-351 | Decorative Laminated Plastic Panels; Determination of Resistance against Abrasion |
| NSF | 30-1992 | Cabinetry and Laboratory Furniture for Hospitals |
| NSF | 49-1992 | Class II (Laminar Flow) Biohazard Cabinetry |
| SAA AS/NZS | 1580.403.2 | Paints and Related Materials – Abrasion Resistance – Taber Abraser |
| SAA AS/NZS | 4266.2 | Reconstituted Wood Based Panels – Determination of Resistance to Surface Abrasion (Taber Abrasion Test) |
| SAE | J 365 | Method of Testing Resistance to Scuffing of Trim Materials |
| SAE | J 948 | Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, Leather, and the Snagging of Automotive Bodycloth |
| SAE | J 1530 | Test Method for Determining Resistance to Abrasion, Bearding, and Fiber Loss of Automotive Carpet Materials |
| SAE | J 2394 | Abrasion Resistance of Insulation Conductors and Cable Jackets |
| SIS | 92 35 09 | Abrasion Resistance of Flooring (Sweden) |
| TAPPI | T476 | Abrasion Loss of Paper and Paperboard |
| UNE | 57-095-78 | Abrasion Resistance of Paper (Spanish) |
©2002-2003 - BYM(Shanghai)